導軌式升降機架體結構的檢查方法

重慶導軌式升降機 http://m.sd-af.com/ 是一種通過人工操作，使貨物起重升降，完成上下層安全運輸?shù)脑O(shè)備。重慶導軌式升降機的起升高度從1米至20米不等，并可根據用戶要求定做特殊規格的導軌式升降機。

重慶導軌式升降機的安全性和穩定性非常重要，除了關鍵的控制系統之外，裝置的架體結構也要經常進行檢查。下面美達斯升降機械的專家就給大家詳細總結一下。

1、首先要查看的是貴陽導軌式升降機架體結構中的基礎和標準節連接螺栓的緊固情況，要以相關的檢驗規范作為標準，比如檢查螺栓上是否設置雙螺帽或彈簧墊。各部位焊縫完好無裂紋及表面質量。
First of all want to see is Guiyang guide rail type lifter frame structure based and the standard section connecting bolts fastening, to the relevant inspection specification as a standard, such as check bolt is set to double nut or a spring pad and the weld intact without crack and surface quality. 

2、重慶導軌式升降機架體結構中的一些附著桿件，同樣也要按照說明書要求，看起是否符合材質、規格設置等方面的特殊要求。從其設置間距來看，一般為六米一道，不能隨意改變。
Guiyang guide rail type lift frame structure in some of the attached parts, as well as in accordance with the requirements of the specification, to see whether it meets the requirements of materials, specifications and other aspects of the special requirements. From its set spacing point of view, generally six meters, can not be arbitrarily changed. 

3、如果在檢查中發現重慶導軌式升降機 http://m.sd-af.com/有用、鋼筋代替螺栓進行固定的情況，一定要加以重視，因為這種做法是非常危險的，有可能會引起嚴重的安全事故。
If during the inspection found Guiyang guide rail type lifter useful, bar to replace the bolt is fixed, we must attach importance to, because this kind of practice is very dangerous and may cause serious safety accidents.